破碎锤（小型）
> 产品中心 > 工务系统 > STANLEY史丹利
产品名称：破碎锤（小型）
产品详情
破碎锤（小型）
MB156 / MB256 / MB05 / MB556 / MB656 / MBX15
史丹利车载破碎锤的设计和制造满足最苛刻的工作场合，和各种应用。同时，也适配各种品牌和各种型号的挖掘机。
产品特点：
● 设计先进，输出功大、效率高
● 最少的活动部件，仅两件，运行可靠，少维护
● 精良的阀设计，适用于更宽的流量和压力范围，部件发热少，受力销
● 在锤底部增加防护，保护壳体和锤芯
● 侧边采用螺栓锁定系统，防止松动
● 重量轻，适用更轻的挖机
● 采用橡胶和聚氨酯耐磨板保护锤芯，吸收震动减少磨损
● 箱式外壳
● 直列式氮气室，为每一次打击增加动力
Stanley’s mounted breakers are designed and built to power through the most demanding tasks on the job-site. You are packing some serious force to break materials in a wide array of markets and applications. Stanley’s mounted products are available for all carrier classes.
Added steel reinforcement at lower end of housing to protect housing and power-cell
Feature:
● Advanced breaker design technology for output energy and efficiency.
● Minimal moving parts, only two for less maintenance, better performance and less service
● Superior valve design for operation within a broader range of pressures and flows with less heat and stress on components
● Added steel reinforcement at lower end of housing to protect housing and power-cell
● Side-plate bolt locking system keeps bolts from loosening
● Lighter weight allowing choice of smaller carrier
● Supported power-cell by rubber cushions and urethane wear plates to absorb shock and vibration and reduce wear - MB556, MB656 and MBX15
● Box style housing - MB556, MB656 and MBX15.
● Direct acting nitrogen chamber boosts the power of each hammer blow
Model 件号 | Description 描述 |
MB15600 | Stanley - Excavator Mount - 6" and 4" Pin Centers 带挖机连接板，6”和 4”销间距 |
MB15614 | Stanley - Excavator Mount - Flange Top 带挖机连接板，顶部法兰 |
MB15641 | Black, Q - Tach for Walk Behind - 6" and 4" Pin Centers Q型钩，6”和 4”销间距 |
MB25600 | Stanley - Excavator Mount - 9" Pin Centers 带挖机连接板，9”销间距 |
MB25600SS | Stanley - Skid Steer - 9" Pin Centers 带滑移连接板，9”销间距 |
MB25603 | Stanley - Excavator Mount - Flange Top 带挖机连接板，顶部法兰 |
MB25641 | Black, Q - Tach for Walk Behind - 9" Pin Centers Q型钩，9”销间距 |
MB2570 | Excavator Mount - 11" Pin Centers 带挖机连接板，11”销间距 |
MB2570SB | Cradle Skid Steer - 11" Pin Centers 带滑移连接板，11”销间距 |
MB2570SS | 2 Position Skid Steer - 11" Pin Centers 带两位滑移连接板，11”销间距 |
MB2570XC | Excavator Mount - Exchange Top 带挖机快换连接板 |
MB2570XCS | Skid Steer with Exchange Top 带滑移快换连接板 |
MB05e00 | Stanley - Excavator Mount - 9" Pin Center and Flange Top (Pin and Bushing Kit Included) 带挖机连接板，9”销间距，法兰连接(含销和法兰) |
MB05s02 | Stanley - Cradle Skid Steer - 9" Pin Centers and Flange Top 带滑移连接板，9”销间距，法兰连接 |
MB05e04 | Stanley - Excavator Mount - CP027 Top 带挖机连接板，CP027顶板 |
MB05s04 | Stanley - Skid Steer with CP027 Top 带滑移连接板，CP027顶板 |
MB05e05 | Stanley - Excavator Mount - Exchange Top 带挖机快换连接板 |
MB05s05 | Stanley - Skid Steer with Exchange Top 带滑移快换连接板 |
MB55600 | Stanley - Excavator Mount - Flange Top 带挖机连接板，法兰连接 |
MB55600SS | Stanley - Skid Steer - Fixed 20 Degrees 带滑移连接板，20°角安装 |
MB55601 | Stanley - Excavator Mount - 14" Pin Centers 带挖机连接板，14”销间距 |
MB5570SB | Stanley - Skid Steer - Fixed 20 Degrees 带滑移连接板，20°角安装 |
MB5570XC | Stanley - Excavator Mount - Exchange Top 带挖机快换连接板 |
MB5570XCS | Stanley - Skid Steer with Exchange Top 带滑移快换连接板 |
MB65603 | Stanley - Excavator Mount - Flange Top 带挖机连接板，法兰连接 |
MB65607 | Stanley - Excavator Mount - 14" Pin Centers 带挖机连接板，14”销间距 |
MB65609 | Stanley - Excavator Mount - 1/4 Yard WainRoy 带挖机Wainroy连接板 |
MB6560XC | Stanley - Excavator Mount - Exchange Top 带挖机快换连接板 |
MBX15E03 | Excavator Mount -Flange Top 带挖机连接板，法兰连接 |
MBX15E00 | Excavator Mount - 14" Pin Centers 带挖机连接板，14”销间距 |
MBX15E09 | Excavator Mount - 1/4 YD Wainroy BRKT 带挖机Wainroy连接板 |
Description 描述 | Metric 单位 | MB156 | MB256 | MB05 | MB556 | MB656 | MBX15 |
Impact Energy Class 冲击功 | J | 250 | 475 | 750 | 1000 | 1200 | 2030 |
Blows Per Minute 次/分钟 | BPM | 600-1200 | 700-1200 | 650-1550 | 590-1100 | 600-1000 | 400-800 |
Weight (with Tool & Mounting Brkt)重量（带钎杆和连接架） | Kg | 79 |
